Attaching a sex doll's head can be relatively easy but can be tricky in order to make sure that it is secure without harming the doll. The process may slightly differ according to the sex doll and how it is designed but use this to find out how to attach your sex doll head:
Brand: Irontech Doll
Materials Needed:
Sex doll head
Sex doll body
Connector mechanism (usually included with the doll)
Lubricant (optional, if needed for easier assembly)
Soft cloth or towel
How to Assemble a Sex Doll Head Step-by-Step Guide: Instructions on how to put it on:
1.Prepare Your Doll and Working Area:
Start by making sure you have a clean working area, especially with new dolls so no dust particles can get into connections which would obviously defeat the purpose. When your work area is prepared, make sure to lay down a soft cloth. This cloth is important as it prevents the parts of your doll, both head and body, from getting scratches, particularly to the neck of the doll when the head is fitted on.
2.Examine the Connectors:
Take the body and head, both separated pieces and check for damaged connections. There are usually snap-on and screw-on connections between the body and the head, and it's important that neither is broken or imperfect before attaching it so that they don't damage each other on assembly.
3.Attach using Screw-On Connectors:
Get your doll's head and push the screw that will be used with it through the connector that is on the neck of the doll. First rotate the head counter-clockwise (this is so you know you are not trying to force it, as you will feel a click, then turn clockwise again). Make sure it is fully inside before rotating the head clockwise to connect the two pieces. Tighten firmly but don't twist it in too much, or you will break the connections.
4.Attach using Snap-On Connectors:
To attach a doll using the snap-on connections, you will want to line them up correctly and gently press them together until the connections snap in. After it feels as though it has connected, gently try to pull the head off the doll to make sure the connections have snapped into place properly.
5.Consider Lubrication:
The connections can sometimes be tight so a very small amount of water-based lube might help. Make sure that you use the correct lube and not any large amounts, as this would obviously make a mess of the materials of the doll.
6.Protect Doll Material:
Always use a cloth to handle the parts so the materials of your doll head and body don't get scratched during attachment. You will probably also want to keep a good eye on them and checking to see if there is damage to the connections so you can try and stop it before it happens.
7.Adjust the Doll Head position:
After the connections have clicked into place or the screw is sufficiently tightened, you can gently move the head of the doll from left to right to ensure it is at the desired angle as most of these dolls don't fix rigidly in position at the neck so you can rotate the head freely after it has been attached.
8.Make sure head is securely on:
Once the head is attached and at the desired angle, you may want to gently wiggle it side-to-side and up and down to make sure it isn't loose and won't fall off and also to ensure there isn't a large gap where the head meets the body of the doll.
Ongoing Care Tips
Every so often inspect the connections that attach the doll's head to its body and ensure they are tight as well as checking for any sign of damage that would affect the future usage of your doll.
Keep all of your doll's connections clean by wiping away any dust particles you may notice from it using a soft cloth. Do not clean doll parts using chemicals or any cleaning products that are not specifically designed to clean sex dolls, as otherwise you may damage your doll.
Conclusion:
Putting the head onto your sex doll will either be screw-on or snap-on, either way if you follow the guidelines that have been put down above you can ensure a snug fit and keep the parts from breaking so that your sex doll is in good working condition for a long period of time.
