Bathing with your sex doll can enhance the experience and ensure it remains clean and well-maintained. Follow this comprehensive guide to make sure the process is safe, enjoyable, and hygienic.
From: Sigafun Doll
Preparation
You will need: Mild, antibacterial soap or dedicated sex toy cleaner-Soft sponge or cloth-Towels (microfiber recommended)-Vaginal irrigator or douche (for internal cleaning)-Optional: powder or cornstarch for TPE dolls-Water-based lubricant (if desired for personal comfort during the bath)
Check Manufacturer's Guidelines:
First of all, check if the doll's materials (silicone or TPE) are waterproof. Also make sure if any electronic components can be removed or are waterproof.
Remove Electronic Components:
In case your doll is equipped with electronic features such as heating elements or AI components, either removing these elements or sealing them properly is necessary to prevent water damage.
Bathing Process
Fill the Bathtub:
Fill the tub with lukewarm water. We recommend avoiding hot water since it can damage the doll’s material.
Prepare the Doll:
Carefully place the doll in the bathtub. You can place the doll sitting or lying down so that its joints and weight distribution will be supported.
Cleaning the Doll:
Utilize a soft sponge or cloth and mild antibacterial soap or dedicated sex toy cleaner. Carefully clean the doll’s body, especially the areas where more attention is necessary, such as the genital and anal areas. If internal cleaning is necessary, use a vaginal irrigator or douche filled with soapy water, and after that with clean water.
Avoiding Damage:
Treat the doll’s skin and joints with care. Do not use abrasive materials or scrub vigorously. Also, make sure to give attention to the places where water could potentially accumulate, such as joints and seams, to make sure the cleaning is complete.
Rinsing:
Use clean water to rinse away any soap residues after washing the doll. It is very important to make sure all soap is removed as soap residues can cause irritations and material degradation.
Drying
Pat Dry:
With care, lift the doll from the tub. In case the doll is heavy, a second person may be helpful. Use a towel for gently patting the doll dry. Avoid rubbing which can cause the material to wear and tear.
Use a clean, dry cloth or an air dryer on a cool setting to thoroughly dry internal cavities. Ensure no moisture remains to prevent mold and mildew.
Air Dry:
Put the doll in an area with good air circulation so it dries completely. It may take quite a few hours for the internal parts to dry.
Post-Bath Care
Applying Powder (for TPE Dolls):
After the doll is leak-proof, sprinkle some powder or corn starch over the surface so that the TPE keeps its suppleness and doesn’t get sticky.
Inspecting for Damage:
Check the doll carefully for any nicks or scratches. Fix any problems right away by using the repair kit if need be.
Storing the Doll:
If you want to keep the doll for a long time, place it in a room where it is not too hot or too humid and keep it away from the sun. To maintain its cleanliness and protection utilize a storage bag or case.
Additional Tips
Regular Maintenance:
Keep your doll clean and in a good condition by regularly cleaning it and inspecting for damage.
Proper Handling:
If you touch the doll gently then it shouldn’t get broken at the joints or where the material is the thinnest.
Use Appropriate Products:
It’s a good idea to only use mild, non-abrasive cleaning products and water-based lubricants so the material doesn’t get damaged.
By following these steps, you can ensure that bathing with your sex doll is a safe and enjoyable experience, keeping your doll clean and well-maintained for years to come.
